Showing Spotlights 2657 - 2664 of 2837 in category All (newest first):
As scientific interests and engineering applications delve down to the nanometer scale, there is a strong need to fabricate nanostructures with good regularity and controllability of their pattern, size, and shape. Furthermore, the nanostructures are useful in many applications only if they cover a relatively large sample area and the manufacturing cost is reasonable. Researchers at UCLA have now achieved a breakthrough by developing a simple but efficient fabrication method to produce well-regulated silicon nanostructures over a large sample area with excellent control of their pattern, size, and shape. Affordable surfaces with well-controlled nanostructures over a large area open new applications not only in electronics but also in the physical world through their unique properties originating from their nanoscale geometry.
Oct 27th, 2006
'Carrier mobility' is a major factor in determining the speed of electronic devices. Aggressive scaling of the complementary metal-oxide-semiconductor (CMOS) transistor technology requires a high drive current, which depends on the charge carrier mobility. As the dimensions of nanoelectronic circuits continue to shrink, it is important that the carrier mobility does not deteriorate and, if possible, improves. The search for nanostructures where the carrier mobility values can be preserved or even improved continues owing to the extremely high technological pay-off if successful. Nanowires represent a convenient system to understand the effects of low dimensionality on the carrier drift mobility. One can also look at nanowires as an ultimately scaled transistor channel. New research at the University of California - Riverside demonstrates a method for the significant enhancement of the carrier mobility in silicon nanowires. Such mobility enhancement would allow to make smaller and faster transistors and improve heat removal.
Oct 26th, 2006
Back in 2005, Dr. Pu-Chun Ke conducted an experimental study ("Coating Single-Walled Carbon Nanotubes with Phospholipids") where he discovered a very efficient method of solubilizing nanotubes using lysophospholipids, or the so-called single-tailed phospholipids. The solubility provided by lysophospholipid LPC is at least one order of magnitude better than that provided by SDS, a routine surfactant people use to solubilize nanomaterials in aqueous solutions. Ke and his colleagues showed that superior solubility was due to the formation of lipid 'striations' coated on the nanotubes. The underling principle of this superior solubility of nanotubes by lysophospholipids is supramolecular assembly, a topic of common interest to researchers in nanoscience, chemistry, materials, and biophysics. New results obtained during recent follow-up research provide useful insight on the binding mechanism of amphiphiles and one-dimensional nanostructures. This knowledge may facilitate the bottom-up design of supramolecular assembly, nanotechnology, nanotoxicology, and gene and drug delivery.
Oct 25th, 2006
Adhesives may be broadly divided in two classes: structural and pressure sensitive. To form a permanent bond, structural adhesives harden via processes such as evaporation of solvent or water (white glue), reaction with radiation (dental adhesives), chemical reaction (two part epoxy), or cooling (hot melt). In contrast, pressure sensitive adhesives (PSAs) form a bond simply by the application of light pressure to attach the adhesive to the adherend. PSAs adhere instantly and firmly to nearly any surface under the application of light pressure, without covalent bonding or activation. Waterborne pressure-sensitive adhesives solve the problem of meeting environmental regulations that forbid the emission of volatile organic compounds in manufacturing. However, often waterborne PSAs have poor adhesive performance. Another problem, particularly relevant to display technologies, is how to make an electrically-conducting material that is also flexible and optically transparent. Indium tin oxide is commonly used as a transparent electrode in displays, but it is brittle and prone to mechanical failure or scratching. Adhesives can be made electrically conductive through the addition of metal particles, but then they lose optical transparency, and their adhesiveness is diminished. New research shows that waterborne PSAs containing single-wall carbon nanotubes (SWNTs) meet the requirements of environmental regulations while improving the adhesive performance. The resulting unprecedented combination of adhesion and conductivity properties holds enormous potential for demanding applications in displays and electronics.
Oct 24th, 2006
Nanotechnology has recently found practical applications in the conservation and restoration of the world's cultural heritage. Nanoparticles of calcium and magnesium hydroxide and carbonate have been used to restore and protect wall paints, such as Maya paintings in Mexico or 15th century Italian masterpieces. Nanoparticle applications were also used to restore old paper documents, where acidic inks have caused the cellulose fibers to break up, and to treat acidic wood from a 400-year-old shipwreck.
Oct 23rd, 2006
Sophisticated biomolecular motors have evolved in nature, where motor proteins actively control the delivery and assembly of materials within cells. In contrast, the development of synthetic nanomotors is in its infancy. Such nanomotors are currently explored for an increasing number of applications in hybrid bionanodevices. Along these lines, gliding motility assays, where reconstituted microtubule filaments are propelled over a substrate by surface-attached motor proteins, have been used to transport micro- and nanosized objects, such as small beads, quantum dots or DNA molecules. However, one prerequisite for controllable nanotransport is the reliable guiding of filament movement along predefined paths, a challenging task that has recently been achieved only via costly and labor-intensive topographical surface modifications. Researchers have now demonstrated a novel approach for the nanostructuring of surfaces with functional motor proteins. In contrast to all other current methods, their approach allows the three-dimensionally oriented deposition of proteins on surfaces, being the result of first binding them to the highly oriented and regulated structures of microtubules and then transferring them to the surface.
Oct 20th, 2006
Nucleoside analogues, which are a class of therapeutic agents, display significant anticancer or antiviral activity by interfering with DNA synthesis. They work by incorporating into the elongating DNA strands and terminating the extension process. However, they also affect normal cell growth, such as bone marrow cells, so there can be significant toxic effects. Further limitations to their use are relatively poor intracellular diffusion, rapid metabolism, poor absorption after oral use, and the induction of resistance. French and Italian researchers have now come up with a completely new approach to render anticancer and antiviral nucleoside analogues significantly more potent. By linking the nucleoside analogues to squalene, a biochemical precursor to the whole family of steroids, the researchers observed the self-organization of amphiphilic molecules in water. These nanoassemblies exhibited superior anticancer activity in vitro in human cancer cells.
Oct 19th, 2006
Paper manufacturing is one of the mainstays of economic infrastructure and paper products influence many aspects of business and personal life. Pulping, process chemistry, paper coating, and recycling are key areas that can benefit from nanotechnology methods. One such method, layer-by-layer (LbL) assembly, is of great interest of its usage in the field of nanocoating. It allows creating nanometer-sized ultrathin films both on large surfaces and on microfibers and cores with the desired composition. Researchers at Louisiana Tech University have developed a simple and cost effective technique to fabricate an electrically conductive paper by applying layer-by-layer nanoassembly coating directly on wood microfibers during paper making process. Nanocoated wood microfibers and paper may be applied to make electronic devices, such as capacitors, inductors, and transistors fabricated on cost-effective lignocellulose pulp. The use of a conductive nanocoating on wood fibers can open the door for the future development of smart paper technology, applied as sensors, communication devices, electromagnetic shields, and paper-based displays.
Oct 18th, 2006
Subscribe to our Nanotechnology Spotlight feed